Certifications
Europe
 |
CE declaration of conformity
Manufactured for: | Speech Processing Solutions GmbH, Gutheil-Schoder-Gasse 8–12, 1100 Wien, Österreich |
Brand: | Philips |
Product name: | Philips SpeechMike Ambient |
Model: | PSM5000 |
Operating temperature: | 5° – 45° C / 41° – 113° F |
Intended Use & Category
Description: Wireless Bluetooth Low Energy (BLE) dictation microphone for voice recording and speech recognition.
Equipment Category: Short Range Device (SRD) / Wideband Data Transmission System.
Intended Use: Intended for indoor use in commercial, office, and healthcare/medical environments (administrative, non-diagnostic use).
SpeechMike Ambient (PSM5000)
Hereby, Speech Processing Solutions GmbH declares that the radio equipment device is in compliance with Directive 2014/53/EU as well as UK Radio Equipment Regulations SI 2017 No.1206. The full text of the EU/UK declaration of conformity is available at the following internet address CE and for UK: https://www.dictation.philips.com/en/philips-speechmike-ambient-wearable-ki-assistent-psm5000-serie/
Product name and model number: SpeechMike Ambient PSM5000
1) Operation Frequency：2402 MHz ~ 2480 MHz
2) Modulation Type: GFSK
3) Maximum power value measured in actual operation: 9,27 mW eirp max
4) Tune up Range value: 10dBm +/- 2dBm
5) Antenna type: PCB antenna
Wireless adapter (ACC5100)
Hereby, Speech Processing Solutions GmbH declares that the radio equipment device is in compliance with Directive 2014/53/EU as well as UK Radio Equipment Regulations SI 2017 No.1206. The full text of the EU/UK declaration of conformity is available at the following internet address CE and for UK: https://www.dictation.philips.com/en/philips-speechmike-ambient-wearable-ki-assistent-psm5000-serie/
Product name and model number: Wireless Adapter ACC5100
1) Operation Frequency：2402 MHz ~ 2480 MHz
2) Modulation Type: GFSK
3) Maximum power value measured in actual operation: 9,06 mW eirp max
4) Tune up Range value: 9.6 dBm +/- 2dBm
5) Antenna type: PCB antenna
USA
SpeechMike Ambient (PSM5000)
FCC Statement
FCC ID: 2AD4M-P5000
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
The SAR limit of USA (FCC) is 1,6 W/kg averaged over one gram of tissue. This device has been tested to complied FCC Specific Absorption Rate (SAR) compliance. The highest reported SAR level for usage near the body (0mm) is 0,173 W/kg.
Wireless adapter (ACC5100)
FCC Statement
FCC ID: 2AD4M-A5100
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Canada Statement
SpeechMike Ambient (PSM5000)
IC: 26381-P5000
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The SAR limit of USA (FCC) is 1,6 W/kg averaged over one gram of tissue. This device has been tested to complied FCC Specific Absorption Rate (SAR) compliance. The highest reported SAR level for usage near the body (0mm) is 0,173 W/kg.
Wireless adapter (ACC5100)
IC: 26381-A5100
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Battery information
Produced in: | China |
Weight: | 8g |
Capacity: | 480 mAh |
Chemical composition: | LiPo |
Nominal Voltage: | 3,7V |
Operating temperature: | 5° - 45° C / 41° - 113° F |
 |
Optimal storage
The battery must not be fully discharged for storage. Maintain a 40%-80% state-of-charge (SoC) if stored for a long period. Charge the battery to >80% of its capacity every 100 days
Battery safety information
The product contains a rechargeable lithium-polymere battery (3.7 V, 480 mAh).
Warning:
Do not disassemble, crush, puncture, modify, or damage the battery.
Do not expose the battery to fire, excessive heat, or direct sunlight.
Do not short-circuit the battery terminals
Do not immerse the product or battery in water or other liquids.
Use only the supplied or specified charging equipment.
Stop using the product if the battery shows signs of swelling, leakage, overheating, or damage.
In the unlikely event of a battery fire, do not inhale smoke. Move the device away from flammable materials if safe to do so. Standard water or a Class ABC extinguisher can be used to cool and suppress the fire. *
Keep out of reach of children.
Open source software
Products mentioned in this manual may contain open source software.
Speech Processing Solutions GmbH hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase. To obtain the source code, please write in English to: info@speech.com.
Neither Speech Processing Solutions GmbH nor its affiliates shall be liable to the purchaser of this product or third parties with respect to claims for damages, losses, costs or expenses incurred by purchaser or third parties as a result of an accident, misuse or abuse of this product or unauthorized modifications, repair, modification of the product or failure to meet the operating and maintenance instructions provided by the manufacturer.
This user manual is a document with no contractual nature. We accept no liability for changes, mistakes or printing errors.